How to Properly Install Viettiles Unfired Artistic Cement Tiles

Let’s explore 5 precise installation steps for Viettiles unfired cement tiles—methods that have been successfully applied in numerous major projects both domestically and internationally.

1. Surface and Material Preparation

Before tiling, ensure the following:

• The subfloor should be 25–30 mm lower than the finished floor level to allow space for the mortar layer.
• The surface must be flat, stable, and dampened with water to enhance adhesion.
• Prepare all necessary tile adhesive, tools, and equipment in advance.

Note: Installing tiles on an uneven surface is the leading cause of corner cracks.

2. Soak the Tiles Before Installation

Before installation:

• Soak Viettiles encaustic cement tiles in water for at least 10 minutes to allow them to absorb moisture and prevent them from drawing water from the mortar.
• Prepare specialized tile adhesive according to the technical guidelines.

This is a crucial step to ensure strong bonding between the tile and the mortar layer, helping to prevent future detachment.

3. Tile Installation

• Evenly spread a layer of cement mortar across the entire floor surface, ensuring it is level and consistent.
• Use a straightedge or string line to establish the first row and corner alignment.
• Lay the tiles one by one in rows, cleaning each tile surface immediately after placement to prevent cement residue.
• Do not tap the tiles forcefully; gently press them into position to adjust alignment.

4. Grouting

• Mix the grout powder with water to form a slightly diluted solution.
• Pour the mixture over the tile surface and use a piece of cardboard to push it thoroughly into the joints.
• Clean the tile surface immediately after grouting to prevent white stains (efflorescence), which can affect aesthetics and make polishing difficult later.

5. Polishing and Finishing

• Use fine sandpaper to gently scrub off any remaining stains.
• Wipe clean with a soft cloth and wait until the tile surface is completely dry before polishing.
• Do not use oil or unknown chemicals on the tile surface, as they may cause discoloration, excessive shine, and reduce the tile’s aesthetic value.

Notable Projects Featuring Viettiles Encaustic Cement Tiles

Hotel SLS – Las Vegas, USA

GATO Restaurant – New York, USA

Maison De Camille Boutique Hotel – TP.HCM

Almaz Center – Vinhomes Riverside, TP.HCM

UBND TP. HCM

These projects have trusted and chosen Viettiles encaustic cement tiles not only for their unique designs but also for their exceptional quality and timeless durability.

Conclusion

Proper installation is the key factor that determines the durability and beauty of Viettiles artistic cement tiles. If you're looking for a premium handcrafted tile that is eco-friendly and offers lasting aesthetic value, choose Viettiles unfired encaustic tiles – the perfect solution for any living space.